The MMS12 VESA Monitor Mount to 5/8″ Spigot – Friction-Loc – QR supports broadcast & production quality monitors up to 45 lb/20kg. Chosen by professionals & rental houses to mount VESA standard monitors to 5/8” (16mm) baby pins. Note: New spigot model as of April 2022 with added 1/4-20 and 3/8-16 tapped holes!

The Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments.

The QR VESA mounting plate model allows you to use much smaller storage/transport cases while keeping setup and take-down time to a minimum. The slim VESA Quick Release Monitor Plate fits to the back of your VESA 75/100mm monitor taking up little space, only adding 10mm/0.39″.

Mount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1/4-20, 3/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.

Supports up to 45 lb/20kg.

Weight: 0.530kg/1.168lbs

Made in Canada. NAFTA Qualified. CETA Qualified.

For those that prefer Standard VESA, Quick Release and/or Landscape/Portrait functionality, consider our other MMS12 models.

For mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.

For those that prefer further articulation and adjustment potential, consider our MMS11 Twin-Hinge Friction-Loc models.

Consider mounting accessories via M5 non-twist baby pin or 15mm spud

MMS 5/8 Baby Pin Non-Twist – M5

The MMS 5/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted, the top of the 5/8 Baby Pin also provides a 3/8 tapped thread for mounting accessories.

MMS 15mm Mounting Spud Non-Twist – M5

The MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.

Select either mounting standard to mount accessories with 15mm or 5/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.

Consider our Baby Pin Pan Lock Clamp

The Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.