
Lectrosonics Digital Hybrid Wireless ® Belt-Pack Transmitter
A1
SKU LECTRO-LT-A1
Available to order — allow extra processing and shipping time
Special order: non-cancelable, non-returnable
The LT transmitter offers a full set of professional features in a compact, rugged package. The unit is compatible with all Digital Hybrid Wireless® receivers and even some from other manufacturers, making it comfortable in a wide variety of applications from video production to theater, stage and house of worship.
The LT can be configured to operate as a “one touch” device with a single power on/off switch on the top panel, or with full access to all operational parameters using the side panel membrane switches and LCD interface. The top panel switch can also be configured to provide a mute or talkback function.
Accessories
Features
- Covers two frequency blocks in the US; three in Europe
- Digital Hybrid Wireless® for compandor-free audio
- Selectable 50 or 100mW output power
- Compatibility modes for use with analog receivers
- 25 or 100 kHz tuning steps for up to 3072 selectable frequencies
- Integrated multi-function switch for mute or talkback modes
- Wide range input gain control in 1 dB steps
- IR port for setup with IR enabled receivers
- USB port for firmware updates
- Menu selectable mic or instrument input
- Optional battery eliminator
- Detachable antenna
- Selectable 50 or 100mW output power (varies per model - see specifications)
- 25 or 100 kHz tuning steps (varies per model)
Specifications
- Antenna: Galvanized steel, flexible wire
- Battery: Two AA; alkaline, lithium, NiMH rechargeable
- Band A1: 470.100 - 537.575
- Band B1: 537.600 - 607.950
- Battery Life: • Duracell Quantum: 4.75 hours
- Band 606: 606.000 - 631.500 • Eneloop 2400 mAH NiMH: 5.5 hours
- Band C1: 614.400 - 691.175
- Weight: 5.9 ounces (169 grams), with lithium
- Dimensions: 2.85 x 2.45 x .75 in. (72 x 62 x 19 mm)
- Emission Designator: 110KF3E (LT)
- Line/Instrument: 35 Hz to 20 kHz (+/-1dB)
- Mic input: 35 Hz to 20 kHz (+/-1dB)
- Mic input LF roll-off: Selectable knee at 35, 50, 70, 100, 120, 150 Hz
- THD: 0.2% (typical)
- Frequency Selection Steps: US: Selectable; 100 kHz or 25 kHz -6
- E01: Selectable; 100 kHz or 25 kHz -9
- E06: Selectable; 100 kHz or 25 kHz -12
- RF Power output: US: Selectable: 50 or 100mW The roll-off slope steepens at lower frequencies.
- Compatibility Modes: US: Nu Hybrid, IFB, Mode 3 exceptionally good
- Pilot tone: 25 to 32 kHz; 3 kHz deviation (Digital Hybrid) compresses 30+ dB of transmitter input range into 4.5 dB of receiver output range,
- Frequency Stability: ± 0.002%
- Spurious radiation: US: Compliant with ETSI EN 300 422-1
- E01/E06/X: 60 dB below carrier
- Equivalent input noise: –120 dBV (A-weighted)
- Mic: • Nominal 2 mV to 300 mV, before limiting Specifications subject to change without notice.
- Instrument: • 1M Ohm high level
- Line: 2k Ohm; Mic: 300 Ohm
- Input limiter: DSP controlled, dual envelope “soft” limiter
- Gain control range: 44 dB; digital control
- Modulation indicators: • Dual bicolor LEDs indicate modulation of
- Controls: • Top panel slide switch; programmable as
- Audio Input Jack: Switchcraft 5-pin locking (TA5F)
Pairs well with

Lectrosonics Digital Hybrid Wireless ® Belt-Pack Transmitter
