The M2T half-rack transmitter houses two stereo transmitters to provide two stereo audio channels, and for up to four mono audio channels in a half-rack space. The audio inputs can be individually configured to be analog or Dante compatible. The analog input connectors are full-size XLR/TRS combo types for balanced line-level analog signals while the input preamp circuits use a special balanced amplifier with very high common mode rejection to minimize hum and noise. A Dante™ Ultimo™ interface via dual RJ45 connectors accepts Dante networked audio inputs and can daisy chain the digital stream to additional units via CAT6 cables. An additional RJ45 jack provides an Ethernet connection for programming and control via Wireless Designer™ software and a USB jack on the front panel allows for firmware updates. The transmitter features a full color, backlit LCD for high visibility in any environment, while the chassis is all-metal and can be racked singly or in pairs using included rack mount hardware.

Accessories

The M2T Digital Half-Rack Transmitter with analog and digital Dante™ network audio inputs presents an excellent sounding IEM platform with a unique level of performance in a wireless in-ear monitor system. With ultra-low latency, digital RF modulation and two stereo digital channels, the M2T provides a truly unique IEM product for demanding, professional applications. The M2T includes a front-panel USB port for firmware updates and an IR port for fast setup. A large, high resolution, backlit LCD and large membrane switches provide an intuitive interface that is highly visible in daylight or dimly lit conditions. The half-rack transmitter provides four audio inputs which can be individually configured to be analog or Dante compatible. The analog input connectors are full size XLR/TRS combo types for balanced line level signals. Input preamp circuits use a special balanced amplifier with very high common mode rejection to minimize hum and noise. Analog signals are converted to an internal digital format which is then encoded, organized into packets, and passed to an RF modulator. The modulated RF signal is filtered before and after amplification to suppress out-of-band noise and spurious signals. The M2T is designed and developed with the professional touring, installation, theater and broadcast customers in mind. The transmitter chassis is all-metal. The front panel is an aluminum extrusion with a durable powder coat finish.

Features

• IEM (Wireless Monitor) with digital RF transmission
• 2 independent stereo audio transmissions per 1/2 RV enclosure
• USB port for firmware updates
• Fully Dante™ compatible
• AES 256 bit encryption with v3.X firmware
• Up to 50 mW per Rf carrier
• All metal housing
• Compatible with Wireless Designer™ Software
• 2 independent stereo audio transmissions per 1/2 RU enclosure
• Dante™ compatible
• AES 256 bit encryption with DCHX mode
• All-aluminum housing
• Compatible with Wireless Designer™ Software with multiplexed, companded audio. The M2T transmitter employs unique technology to provide ruler-flat frequency response and maximum channel separation. In addition, the digital audio eliminates a compandor and the associated artifacts. The result is crystal clear sound, rock solid stereo imaging, and extremely low distortion of <0.15%.

Specifications

• RF Power Output: • Two carriers; two audio channels each
• M2T/E06: Power adjustable on each
• Antenna Output: 2 x BNC sockets
• Celsius: -20° - 40°
• Farenheit: -5° - 104°
• Steps: 25 kHz
• Frequency Stability: ± 0.002%
• Modulation: 8 PSK
• Emission Designator: 200KG7E
• Spurious Radiation: Compliant with ETSI EN 300 422-1
• Encryption: AES 256 bit CTR mode, in DCHX compat mode
• Equivalent input Noise: –128 dBV
• Latency: (overall system)
• Digital Source: 1.0 ms plus Dante network (on Dante unit)
• Analog Source: <1.8ms
• Response: 10 Hz – 11.5 kHz, -1 dB
• Audio Input: -10 dBV or +4 dBu settings w/ ±5 dB trim
• Audio Input Jack: 4 x combo XLR/TRS connectors
• Line: 2k Ohm
• Dante Connection: 2 x RJ45, 4 audio RX channels, internally routable
• Ethernet Connection: RJ45
• USB Connection: Micro-B USB on front panel
• IRDA: IR transceiver for sync of receivers
• Requirements: 9-18 VDC
• Power Consumption: 11 Watts
• Weight: 2.2 lbs (997.903 grams)
• Height: 1.750 in. / 44.45 mm
• Width: 8.375 in. / 212.7 mm
• Depth: 7.750 in. / 196.8 mm
• Origin: Designed and manufactured in the USA