{"title":"Rigging \u0026 Support","description":"","products":[{"product_id":"upgrade-innovations-ruckus-r710-battery-mounting-plate","title":"Upgrade Innovations Ruckus R710 Battery Mounting Plate","description":"\u003cp\u003eThe Ruckus R710 Battery Mounting Plate is a mounting solution for the RUCKUS R710 Indoor Access Point. The mounting plate engages into slots on the back of the Ruckus unit, engaging the locking latch with custom screw heads. Once installed, additional screws\/washers are provided to act as secondary stops to hold the Ruckus unit to the mounting plate.\u003c\/p\u003e\n\u003cp\u003eMount the Ruckus unit to a Mafer Clamp with included fasteners or mount to a baby pin with our MMS12 F-Loc Spigot Mount.\u003c\/p\u003e\n\u003cp\u003ePurchase the Ruckus R710 Battery Mounting Plate on its own or purchase with our MMS12 F-Loc Spigot Mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRuckus R710, Mafer Clamp and various Battery Adapter Plates are not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Ruckus R710 Battery Mounting Plate","offer_id":49763785769098,"sku":"12480","price":125.0,"currency_code":"USD","in_stock":true},{"title":"Ruckus R710 Battery Mounting Plate to MMS12 Spigot Adapter","offer_id":49763785801866,"sku":"12475","price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-upgrade-innovations-ruckus-r710-battery-mounting-plate.jpg?v=1787682647"},{"product_id":"upgrade-innovations-whaley-rail-flip-open-corner-clamp","title":"Upgrade Innovations Whaley Rail Flip Open Corner Clamp","description":"\u003cp\u003eThe Whaley Rail Flip Open Corner Clamp is designed to quickly release and clamp to 1.5″ OD (outer diameter) vertical posts, such as our Whaley Rail vertical post or Inovativ cart legs. The flip open clamp design allows the clamp to be installed directly over the post, without having to slide it from the end of the tubing. The clamp is used to hold our 1″ round-edge square tubing from our Whaley Rail horizontal rail and Laptop Swing Arm.\u003c\/p\u003e\n\u003cp\u003eThe Whaley Rail Flip Open Corner Clamp is available as a single clamp or as a set of two.\u003c\/p\u003e\n\u003cp\u003eThe single clamp is ideal for past Laptop Swing Arm users to make use of the flip open corner clamp.\u003c\/p\u003e\n\u003cp\u003eThe set of clamps are available for those looking to add extra hardware alongside their existing Whaley Rail frame system. To add a horizontal cross rail, check out our Whaley Rail II – Horizontal Rail.\u003c\/p\u003e\n\u003cp\u003eAdapt to other tubing diameters with our Whaley Rail Flip Open Clamp Reducers, available in 1.25″, 1″, 0.75″, 35mm, 30mm, and 25mm sizes.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Single","offer_id":49763707748490,"sku":"13970","price":152.5,"currency_code":"USD","in_stock":true},{"title":"Set of Two","offer_id":49763707781258,"sku":"14205","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-upgrade-innovations-whaley-rail-flip-open-corner-clamp.jpg?v=1787682649"},{"product_id":"upgrade-innovations-cine-mounting-plate","title":"Upgrade Innovations Cine Mounting Plate","description":"\u003cp\u003eThe Cine Mounting Plate is perfect for when you need to solid mount a camera, small monitor or accessory. Removable rubber keepers, a built in rubber pad and a 1\/4-20 knob screw keep your accessory from twisting loose. The mounting platform can be used as a cheese plate with 1\/4″ threaded mounting holes. Try the Cine Mounting Plate with one of our Rudy Arm articulating arms.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"1\/4\" Pin-Loc 15mm Rod Clamp","offer_id":49763781542026,"sku":"11475","price":67.5,"currency_code":"USD","in_stock":true},{"title":"1\/4\" Pin-Loc 15mm Spud - 2.5\" Length","offer_id":49763781574794,"sku":"11470","price":67.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-upgrade-innovations-cine-mounting-plate.jpg?v=1787682650"},{"product_id":"upgrade-innovations-cine-cheese-plate","title":"Upgrade Innovations Cine Cheese Plate","description":"\u003cp\u003eThe Cine Cheese Plate provides standard ARRI and SmallHD non-twist mounting options on a small 2.29″ x 2.39″ cheese plate. The Cine Cheese Plate is available separately or bundled with the Upgrade Innovations SmallHD 1\/4 Pin-Lock 15mm Spud.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"No 15mm Spud","offer_id":49763733700746,"sku":"12275","price":40.0,"currency_code":"USD","in_stock":true},{"title":"With 15mm Spud 1\/4 Pin-Lock","offer_id":49763733733514,"sku":"12250","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-upgrade-innovations-cine-cheese-plate.jpg?v=1787682652"},{"product_id":"upgrade-innovations-dit-box-laptop-tray","title":"Upgrade Innovations DIT BOX Laptop Tray","description":"\u003cp\u003eThe Laptop Tray from our DIT BOX system is now available separately for users looking for a lightweight laptop mounting solution.\u003c\/p\u003e\n\u003cp\u003eMake use of non-twist mounting patterns on the laptop tray to mount lightweight accessories via the ARRI 3\/8″ pin-loc and Arri 1\/4″ pin-loc mounting holes.\u003c\/p\u003e\n\u003cp\u003eLaptop Tray is outfitted with VESA 75 and 100mm patterns in two positions (center and center back).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew –\u003c\/strong\u003eLaptop Tray now includes rubber feet which can be mounted with screws. With the QR Monitor Plate attached, the Laptop Tray will rest properly on the rubber feet on a flat surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEach Laptop Tray kit includes:\u003c\/strong\u003e\u003cbr\u003e\n2x Laptop clamps, 2x tie-down M6 Thumb Screws, 6x Spacer Plates, 4x Rubber Feet\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThree options available:\u003c\/strong\u003e\u003cbr\u003e\nLaptop Tray (#12950) – no spigot mount mounting option. Spigot mount can be purchased separately, or make use of your existing hardware.\u003c\/p\u003e\n\u003cp\u003eLaptop Tray to Spigot Adapter (#12935) – includes a spigot mount that directly mounts to the Laptop Tray via 2x M5 screws.\u003c\/p\u003e\n\u003cp\u003eLaptop Tray to VESA Quick Release Plate to Spigot Adapter (#12940) – includes our popular QR VESA Plate system to quickly release and attach spigot adapter.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"No Spigot","offer_id":49763749462154,"sku":"12950","price":295.0,"currency_code":"USD","in_stock":true},{"title":"Spigot Adapter","offer_id":49763749494922,"sku":"12935","price":340.0,"currency_code":"USD","in_stock":true},{"title":"VESA Quick Release Plate to Spigot Adapter","offer_id":49763749527690,"sku":"12940","price":480.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-upgrade-innovations-dit-box-laptop-tray.jpg?v=1787682654"},{"product_id":"8075-0116","title":"Anton\/Bauer Universal BP","description":"Universal V-Mount bracket for use in various applications using V-Mount batteries. Includes a 10A fused PowerTap and ope Positive and Negitive wires for custom applications. \u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eTechnical Specifications\u003c\/strong\u003e \u003cbr\u003e \u003cstrong\u003eCamera Brand:\u003c\/strong\u003e Universal \u003cbr\u003e \u003cstrong\u003eCamera Model:\u003c\/strong\u003e Universal \u003cbr\u003e \u003cstrong\u003eCompatibility:\u003c\/strong\u003e Universal \u003cbr\u003e \u003cstrong\u003eMount Type:\u003c\/strong\u003e Gold Mount","brand":"Anton\/Bauer","offers":[{"title":"Default Title","offer_id":49761074806922,"sku":"8075-0116","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/norm-anton_bauer_8075_0307_pro_gold_mount_battery_1596764_e137fa09-4882-4953-958a-e4b0dcf258a9.png?v=1784841460"},{"product_id":"12050","title":"Upgrade Innovations MMS11-MC VESA Monitor Mount to 5\/8\" Spigot - Twin Ball-Loc - QR","description":"\u003cp\u003eThe MMS11-MC VESA Monitor Mount to 5\/8″ Spigot – Twin Ball-Loc – Quick Release supports broadcast \u0026amp; production quality monitors up to 77 lb\/35kg, designed specifically for mobile cart\/truck applications. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.\u003c\/p\u003e\n\u003cp\u003eThe Ball-Loc hinge design keeps your monitor secure from the static and dynamic forces when moving your DIT cart or rolling stand on set or on location. This innovative design is for heavier loads and long term use, assured by our lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eThe QR VESA mounting plate model allows you to use much smaller storage\/transport cases while keeping setup and take-down time to a minimum. The slim VESA Quick Release Monitor Plate fits to the back of your VESA 75\/100mm monitor taking up little space, only adding 10mm\/0.39″.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 77 lb\/35kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.635kg\/1.400lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Standard VESA, Quick Release and\/or Landscape\/Portrait functionality, consider our other MMS11-MC models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer fine view-angle adjustment, consider our Friction-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer our single hinge models, consider our MMS09 Single-Hinge Ball-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/20200515-IMG_5619NL.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761079820426,"sku":"12050","price":367.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/norm-20200520-IMG_5951_2805d45a-f600-47a4-a67d-6a5ba664d662.png?v=1784752350"},{"product_id":"11380","title":"Upgrade Innovations VESA Adapter Set - 200x100mm \u0026 200x200mm","description":"\u003cp\u003eThe adapter set allows you take any standard VESA plate and expand it to either 200mm x 100mm or 200mm x 200mm. This set will go with any of the Upgrade Innovations monitor mount plates (Standard VESA Plate, Landscape\/Portrait VESA Plate, Quick Release VESA Plate, and QR-L\/P VESA Plate) and comes with a complete set of mounting screws.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761079853194,"sku":"11380","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/cb-logo-sq-upgrade-innovations_ef528a7d-89cf-4a44-b2dd-2798a97a94af.png?v=1786380321"},{"product_id":"12005","title":"Upgrade Innovations VESA Quick Release Monitor Plate","description":"\u003cp\u003eThe VESA Quick Release Monitor Plate can be purchased separately so that you can avoid having to switch the Monitor Plate if you have multiple Monitors for your Quick Release mount. The slim quick release plate mounts to the back of your monitor taking up little space to keep setup and take-down time to a minimum.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponents Included\u003cbr\u003e\u003c\/strong\u003eQR Monitor Plate, Flat Head Phillips – various lengths (M4 x 10mm x4, M4 x 20mm x 4), Aluminum Spacers x4\u003c\/p\u003e\n\u003cp\u003eFor the full Quick Release Assembly kit, consider referring to our VESA Quick Release Mount Adapter product page.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761079885962,"sku":"12005","price":82.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12005.jpg?v=1787682857"},{"product_id":"12601","title":"Upgrade Innovations Whaley Rail Clamp","description":"\u003cp\u003eAdd additional Whaley Rail Clamps to your Whaley Rail II system for mounting further accessories. The rail clamp is easily quick released and added to rail system, providing a solid clamp to our 1″ round-edge square rail. Features Arri 1\/4-20 Pin-Loc and Arri 3\/8-16 Pin-Loc mounting patterns on multiple surfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis Whaley Rail Clamp kit does not include a Whaley Pin-Loc Baby Pin\u003c\/strong\u003e. See our other available kits for our baby pin versions. This kit is ideal for those looking to add a Whaley Rail Clamp without a baby pin to their Whaley Rail frame system for other mounting setups.\u003c\/p\u003e\n\u003cp\u003eMount our innovative Whaley 3\/8 Pin-Loc Baby Pin and\/or our VESA Quick Release Plates, available separately.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761080049802,"sku":"12601","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12601.jpg?v=1787682860"},{"product_id":"12990","title":"Upgrade Innovations Spigot Adapter to 15mm Ball-Loc Pivot Clamp","description":"\u003cp\u003eThe Spigot Adapter to 15mm Ball-Loc Pivot Clamp is a quick solution to mounting a 15mm set-up to a 5\/8″ baby pin. It uses our Ball-loc system allowing for superior hold and heavier use, as well as articulating and positioning the mounted accessory.\u003c\/p\u003e\n\u003cp\u003eThis is an ideal spigot mount for Ipad mounting solutions from LS Digi and Bitpart, especially when paired with our available 15mm mounting spuds (see list below).\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761080082570,"sku":"12990","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12990.jpg?v=1787682861"},{"product_id":"upgrade-innovations-whaley-pin-loc-baby-pin","title":"Upgrade Innovations Whaley Pin-Loc Baby Pin","description":"\u003cp\u003eThe 6.6″ Whaley Pin-Loc Baby Pin is a non-twist baby pin, designed specifically for our Whaley Rail frame system. The Whaley Pin-Loc is using the ARRI standard pin-loc spacing, with a longer 3\/8″ male thread to provide added anchor strength.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"2.5in \/ Standard Aluminum","offer_id":49761080148106,"sku":"13485","price":37.5,"currency_code":"USD","in_stock":true},{"title":"3in \/ Standard Aluminum","offer_id":49761080180874,"sku":"13980","price":37.5,"currency_code":"USD","in_stock":true},{"title":"6.6in \/ Standard Aluminum","offer_id":49761080213642,"sku":"13490","price":45.0,"currency_code":"USD","in_stock":true},{"title":"3in \/ Stainless Steel","offer_id":49818206273674,"sku":"13980_new","price":37.5,"currency_code":"USD","in_stock":true},{"title":"6.6in \/ Stainless Steel","offer_id":49818206306442,"sku":"13490_new","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-upgrade-innovations-whaley-pin-loc-baby-pin.jpg?v=1787682862"},{"product_id":"12088","title":"Upgrade Innovations MMS11 VESA Monitor Mount to 5\/8\" Spigot - Twin Friction-Loc - QR-L\/P","description":"\u003cp\u003eThe MMS11 VESA Monitor Mount to 5\/8″ Spigot – Twin Friction-Loc – QR-L\/P supports broadcast \u0026amp; production quality monitors up to 40 lb\/18kg. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins.\u003c\/p\u003e\n\u003cp\u003eThe Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments and gives you 360 degree position lock down. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.\u003c\/p\u003e\n\u003cp\u003eThe QR-L\/P VESA mounting plate model combines the capabilities of the LP-Swinger model with the convenience of the Quick Release option. Keep setup and take-down time to a minimum, while making full use of the full monitor display screen by swinging your monitor from the landscape to portrait position.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 40 lb\/18kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.880kg\/1.940lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Standard VESA, Quick Release or Landscape\/Portrait functionality, consider our other MMS11 models.\u003c\/p\u003e\n\u003cp\u003eFor mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer our single hinge models, consider our MMS12 Single-Hinge Friction-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/20200515-IMG_5600NL-1.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761080246410,"sku":"12088","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12088.jpg?v=1787682864"},{"product_id":"12565","title":"Upgrade Innovations MMS 5\/8 Mounting Baby Pin Non-Twist - M5","description":"2.2\" length 5\/8 Baby Pin \u003cbr\u003e \u003cbr\u003e Hard-mounts to latest Monitor Mount revisions via M5 thread. \u003cbr\u003e \u003cbr\u003e Mounts via 5\/32 or 4mm Hex Key. \u003cbr\u003e \u003cbr\u003e 3\/8 tapped thread for mounting accessories \u003cbr\u003e \u003cbr\u003e Solidly built with Anodized Aircraft Aluminum. \u003cbr\u003e \u003cbr\u003e \u003cstrong\u003eCaution - Using M5 thread on our previous MMS12 Hinge Model (purchased prior to April 2022) for accessories will interfere with portrait swing due to clearance with Landscape\/Portrait Monitor Plates. All other hinge models (MMS11, MMS11-MC, MMS09 and latest MMS12 version) have proper clearance for Landscape\/Portrait functionality.\u003c\/strong\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761080344714,"sku":"12565","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12565.jpg?v=1787682866"},{"product_id":"12047","title":"Upgrade Innovations VESA Quick Release Receiver Plate","description":"\u003cp\u003eThe VESA Quick Release Receiver Plate can be purchased separately to outfit more Upgrade Innovations MMS spigot mounts, Whaley Rail Clamps or third party stands, brackets or arms.\u003c\/p\u003e\n\u003cp\u003eThe VESA Quick Release Receiver Plate fits all Upgrade Innovations monitor mounts via the 1\/4-20 Flat Head Mounting Pattern.\u003c\/p\u003e\n\u003cp\u003eAttach the VESA Quick Release Receiver Plate to VESA 75mm compatible third party stands, brackets, arms or wall mount. Additional components are provided to mount the Quick Release Receiver Plate  to compatible third party VESA mounts via the VESA 75mm pattern.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponents Included\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eQR Receiver Plate\u003c\/strong\u003e: QR Receiver Plate, Flat Head Socket 1\/4-20 x 5\/8 x2, Phillips Pan Head M4 x 10mm x4, M4 x12mm x 4, Red Thumbscrew (M4 x 12mm, M4 x 16mm)\u003c\/p\u003e\n\u003cp\u003eFor the full Quick Release Assembly kit, consider referring to our VESA Quick Release Mount Adapter product page.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761080377482,"sku":"12047","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12047.jpg?v=1787682868"},{"product_id":"12077","title":"Upgrade Innovations MMS09 VESA Monitor Mount to 5\/8\" Spigot - Ball-Loc - QR-L\/P","description":"\u003cp\u003eThe MMS09 VESA Monitor Mount to 5\/8″ Spigot – Ball-Loc – QR-L\/P supports broadcast \u0026amp; production quality monitors up to 77 lb\/35kg, designed specifically for mobile cart\/truck applications. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins.\u003c\/p\u003e\n\u003cp\u003eThe Ball-Loc hinge design keeps your monitor secure from the static and dynamic forces when moving your DIT cart or rolling stand on set or on location. This innovative design is for heavier loads and long term use, assured by our lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eThe QR-L\/P VESA mounting plate model combines the capabilities of the LP-Swinger model with the convenience of the Quick Release option. Keep setup and take-down time to a minimum, while making full use of the full monitor display screen by swinging your monitor from the landscape to portrait position.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 77 lb\/35kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.615kg\/1.36lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Standard VESA, Quick Release or Landscape\/Portrait functionality, consider our other MMS09 models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer fine view-angle adjustment, consider our Friction-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer further articulation and adjustment potential, consider our MMS11-MC Twin-Hinge Ball-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/20200515-IMG_5669NL.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761080410250,"sku":"12077","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12077.jpg?v=1787682870"},{"product_id":"12655","title":"Upgrade Innovations MMS Quick Release VESA Plate Screw Set","description":"\u003cp\u003eOrder extra screw packs for the QR Monitor Plate.\u003c\/p\u003e\u003c!-- specs-from-master --\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Quick Release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Mounting Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Upgrade Innovations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 12655\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 0.04 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping carton:\u003c\/strong\u003e 1.97 x 1.18 x 0.79 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761080443018,"sku":"12655","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12655.jpg?v=1787682872"},{"product_id":"14400","title":"Upgrade Innovations Baby Pin Pan Lock Clamp","description":"\u003cp\u003eBaby pin mounting is common on set; however, these mounting systems can suffer on mobile applications where spigot tie down knobs inevitably loosen from mobile forces.\u003c\/p\u003e\n\u003cp\u003eThe Baby Pin Pan Lock Clamp is designed to clamp onto any standard 5\/8 (16mm) baby pin and integrates with all Upgrade Innovations spigot adapters. The pan lock clamp limits the mount from panning on the baby pin.\u003c\/p\u003e\n\u003cp\u003eThe front mounting surface of the Baby Pin Pan Lock Clamp is outfitted with an Arri 3\/8″ Pin-Loc pattern for rigging non-twist accessories, if the setup allows mounting access for accessories (for example, focus stations with SmallHD 13″ monitors).\u003c\/p\u003e\n\u003cp\u003eIn use, the Baby Pin Pan Lock Clamp, will keep monitors in the desired orientation, when for example, using our Ball-Loc Spigot to VESA Monitor Mounts, on our Whaley Rail Monitor Mounting Frame.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSee below for list of compatible Upgrade Innovations Spigot Adapters.\u003c\/b\u003e\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761080475786,"sku":"14400","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-14400.jpg?v=1787682873"},{"product_id":"13300","title":"Upgrade Innovations VESA 100 Adapter for Quick Release Receiver Plate","description":"\u003cp\u003eThe VESA 100 Adapter for Quick Release Receiver Plate is a mounting accessory for our VESA Quick Release Mount Adapter. The VESA 100 Adapter provides the ability to mount the VESA Quick Release Receiver Plate to third party stands, brackets, arms or wall mounts that only have a VESA 100mm pattern (ie, no VESA 75mm pattern).\u003c\/p\u003e\n\u003cp\u003eThe VESA 100 Adapter plate acts as an interface plate, by mounting the QR Receiver Plate with flush mounted flat head screws via a VESA 75mm pattern, while tapped M4 holes in a VESA 100mm pattern provide mounting pattern to mount to a third party VESA plate.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761080574090,"sku":"13300","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-13300.jpg?v=1787682875"},{"product_id":"12774","title":"Upgrade Innovations Arri 3\/8\" Pin-Loc Spigot Adapter","description":"\u003cp\u003eThe Arri 3\/8″ Pin-Loc Spigot Adapter can be attached to ARRI Pin-Loc mounting patterns to provide a non-twist spigot mount.\u003c\/p\u003e\u003c!-- specs-from-master --\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Arri 3\/8\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Mounting Hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Upgrade Innovations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 12774\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 0.35 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping carton:\u003c\/strong\u003e 3.94 x 2.36 x 1.18 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761080672394,"sku":"12774","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12774.jpg?v=1787682877"},{"product_id":"12010","title":"Upgrade Innovations VESA Quick Release Mount Adapter","description":"\u003cp\u003eThe VESA Quick Release Mount Adapter is the perfect option to upgrade your monitor with Quick Release compatibility. Take your QR outfitted monitor and mount it to your monitor arms or brackets on your cart, van or office.\u003c\/p\u003e\n\u003cp\u003eThe VESA Quick Release Receiver Plate fits all Upgrade Innovations monitor mounts via the 1\/4-20 Flat Head Mounting Pattern.\u003c\/p\u003e\n\u003cp\u003eThe VESA Quick Release Mount Adapter is a universal QR adapter kit to securely attach the VESA Quick Release Receiver Plate to VESA 75mm compatible third party stands, brackets, arms or wall mount. Additional components are provided to mount the Quick Release Receiver Plate  to compatible third party VESA mounts via the VESA 75mm pattern.\u003c\/p\u003e\n\u003cp\u003eThe Quick Release Monitor Plate fits FDMI VESA 75\/100mm monitors.\u003c\/p\u003e\n\u003cp\u003ePurchase the full assembly or the QR Receiver Plate or QR Monitor Plate separately to build out your QR setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuick Release Assembly Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSupports up to 77 lb\/35kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.250kg\/0.551lbs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComponents Included\u003c\/strong\u003e\u003cbr\u003e\n\u003cstrong\u003eQR Receiver Plate\u003c\/strong\u003e: QR Receiver Plate, Flat Head Socket 1\/4-20 x 5\/8 x2, Phillips Pan Head M4 x 10mm x4, M4 x12mm x 4, Red Thumbscrew (M4 x 12mm, M4 x 16mm)\u003cbr\u003e\n\u003cstrong\u003eQR Monitor Plate:\u003c\/strong\u003e QR Monitor Plate, Flat Head Phillips – various lengths (M4 x 10mm x4, M4 x 20mm x 4), Aluminum Spacers x4\u003cbr\u003e\n\u003cstrong\u003eQR Full Assembly:\u003c\/strong\u003e Includes both the QR Receiver Plate and the QR Monitor Plate, and all the mounting fasteners listed above.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761080770698,"sku":"12010","price":152.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12010.jpg?v=1787682879"},{"product_id":"12070","title":"Upgrade Innovations MMS09 VESA Monitor Mount to 5\/8\" Spigot - Ball-Loc - QR","description":"\u003cp\u003eThe MMS09 VESA Monitor Mount to 5\/8″ Spigot – Ball-Loc – Quick Release supports broadcast \u0026amp; production quality monitors up to 77 lb\/35kg, designed specifically for mobile cart\/truck applications. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins.\u003c\/p\u003e\n\u003cp\u003eThe Ball-Loc hinge design keeps your monitor secure from the static and dynamic forces when moving your DIT cart or rolling stand on set or on location. This innovative design is for heavier loads and long term use, assured by our lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eThe QR VESA mounting plate model allows you to use much smaller storage\/transport cases while keeping setup and take-down time to a minimum. The slim VESA Quick Release Monitor Plate fits to the back of your VESA 75\/100mm monitor taking up little space, only adding 10mm\/0.39″.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 77 lb\/35kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.490kg\/1.080lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Standard VESA, Quick Release and\/or Landscape\/Portrait functionality, consider our other MMS09 models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer fine view-angle adjustment, consider our Friction-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer further articulation and adjustment potential, consider our MMS11-MC Twin-Hinge Ball-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/20200515-IMG_5669NL.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761080803466,"sku":"12070","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/norm-20200520-IMG_5975_cb840e79-2515-4db8-ba74-1cb988b85879.png?v=1784752370"},{"product_id":"10802","title":"Upgrade Innovations 19mm to 15mm Captive Step Down Bushing","description":"\u003cp\u003eThe 19mm to 15mm Captive Step Down Bushing makes your 19mm rod clamp work with 15mm rods. The captive design will keep bushing on clamp and works with our Arri 3\/8″ Pin-Loc 19mm Pivot Clamp and Arri 3\/8″ Pin-Loc 19mm Rod Clamp.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761081032842,"sku":"10802","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-10802.jpg?v=1787682880"},{"product_id":"11155","title":"Upgrade Innovations MMS 5\/16 Tie Down Knob","description":"\u003cp\u003eReplacement MMS 5\/16 Tie Down Knob for all of our Monitor Mounts (MMS09, MMS12, MMS11, MMS11-MC).\u003c\/p\u003e\u003c!-- specs-from-master --\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Monitor Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Upgrade Innovations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 11155\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 0.08 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping carton:\u003c\/strong\u003e 1.97 x 1.18 x 0.79 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761081065610,"sku":"11155","price":12.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-11155.jpg?v=1787682882"},{"product_id":"11250","title":"Upgrade Innovations Offset 15mm Rod Clamp","description":"The Offset 15mm Rod Clamp can clamp two 15mm rods at either 1\" or 2\" spacing. \u003cbr\u003e \u003cbr\u003e Adjustable Levers and Socket Cap Screws are provided for either tool or tool-less clamping. \u003cbr\u003e \u003cbr\u003e Used in our Grip Handle to Offset 15mm Rod Clamp (Set of Two) kit which can be used to add grip handles to a Rudy Arm 15mm frame. \u003cbr\u003e \u003cbr\u003e Pair it with our RudyArm articulating arm for endless mounting options. \u003cbr\u003e \u003cbr\u003e Solidly built with premium 6061 aircraft aluminum, Mil-Spec anodizing \u0026amp; stainless steel hardware.","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761081098378,"sku":"11250","price":32.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-11250.jpg?v=1787682884"},{"product_id":"11253","title":"Upgrade Innovations 15mm Rod Clamp - 1\/4-20","description":"\u003cp\u003eThe 15mm Rod Clamp – 1\/4-20 mounts to any 1\/4″-20 thread. Mounting is easy with our high quality wing knobs and the removable friction washer allows for any fine adjustments.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761081131146,"sku":"11253","price":28.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-11253.jpg?v=1787682885"},{"product_id":"11400","title":"Upgrade Innovations Cine Clamp","description":"The Cine Clamp is a compact, lightweight clamp built for fast rigging on production carts, stands \u0026amp; sets. Machined for strength in a small footprint, it gives camera \u0026amp; video teams a versatile attachment point wherever the build calls for one. Chosen by professionals \u0026amp; rental houses for its dependable hold and low profile. \u003cbr\u003e \u003cu\u003eSpecifications:\u003c\/u\u003e\u003cbr\u003e Weight: 0.21 lb (0.10 kg)\u003cbr\u003e Dimensions: 4.72 x 3.15 x 1.18 in (12.0 x 8.0 x 3.0 cm)","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761081163914,"sku":"11400","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-11400.jpg?v=1787682887"},{"product_id":"11465","title":"Upgrade Innovations Cine Mounting Plate","description":"\u003cp\u003eThe Cine Mounting Plate is perfect for when you need to solid mount a camera, small monitor or accessory. Removable rubber keepers, a built in rubber pad and a 1\/4-20 knob screw keep your accessory from twisting loose. The mounting platform can be used as a cheese plate with 1\/4\" threaded mounting holes. Try the Cine Mounting Plate with one of our Rudy Arm articulating arms.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761081426058,"sku":"11465","price":47.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-11465.jpg?v=1787682889"},{"product_id":"11570","title":"Upgrade Innovations MMS09 VESA Monitor Mount to 5\/8\" Spigot - Ball-Loc - Standard","description":"\u003cp\u003eThe MMS09 VESA Monitor Mount to 5\/8″ Spigot – Ball-Loc – Standard supports broadcast \u0026amp; production quality monitors up to 77 lb\/35kg, designed specifically for mobile cart\/truck applications. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins.\u003c\/p\u003e\n\u003cp\u003eThe Ball-Loc hinge design keeps your monitor secure from the static and dynamic forces when moving your DIT cart or rolling stand on set or on location. This innovative design is for heavier loads and long term use, assured by our lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eThe Standard VESA mounting plate model comes with our industry favourite captive thumbscrews and will fit FDMI Standard VESA 75\/100mm patterns.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 77 lb\/35kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.395kg\/0.871lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Quick Release and\/or Landscape\/Portrait functionality, consider our other MMS09 models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer fine view-angle adjustment, consider our Friction-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer further articulation and adjustment potential, consider our MMS11-MC Twin-Hinge Ball-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/20200515-IMG_5669NL.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider for SmallHD 4K Production Monitors\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00300-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe SmallHD 4K Standard VESA Plate Spacers + Thumbscrews to clear away the VESA plate from the SmallHD 4K monitor VESA\/fan arrangement by an additional 3\/8″ (10mm) spacing.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761081458826,"sku":"11570","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/norm-20200520-IMG_5972_2dcbbf5d-2f68-4104-b9df-79b7262dd141.png?v=1784752380"},{"product_id":"11577","title":"Upgrade Innovations MMS09 VESA Monitor Mount to 5\/8\" Spigot - Ball-Loc - L\/P","description":"\u003cp\u003eThe MMS09 VESA Monitor Mount to 5\/8″ Spigot – Ball-Loc – L\/P supports broadcast \u0026amp; production quality monitors up to 77 lb\/35kg, designed specifically for mobile cart\/truck applications. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins.\u003c\/p\u003e\n\u003cp\u003eThe Ball-Loc hinge design keeps your monitor secure from the static and dynamic forces when moving your DIT cart or rolling stand on set or on location. This innovative design is for heavier loads and long term use, assured by our lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eThe L\/P VESA mounting plate model is studio friendly. Quickly swing your monitor from the landscape to portrait position or level the monitor when on an uneven surface. This mounting option comes with built in adjustable friction and a locking knob to hold the monitor in place. Ideal for your green screen, stills and social media work, as you can make use of the full monitor display screen. The model comes with our industry favourite captive thumbscrews and will fit FDMI Standard VESA 75\/100mm patterns.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 77 lb\/35kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.490kg\/1.08lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Standard VESA, Quick Release and\/or Landscape\/Portrait functionality, consider our other MMS09 models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer fine view-angle adjustment, consider our Friction-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer further articulation and adjustment potential, consider our MMS11-MC Twin-Hinge Ball-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/20200515-IMG_5669NL.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider for SmallHD 4K Production Monitors\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00300-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe SmallHD 4K Standard VESA Plate Spacers + Thumbscrews to clear away the VESA plate from the SmallHD 4K monitor VESA\/fan arrangement by an additional 3\/8″ (10mm) spacing.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761081491594,"sku":"11577","price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-11577.jpg?v=1787682891"},{"product_id":"11585","title":"Upgrade Innovations MMS11 VESA Monitor Mount to 5\/8\" Spigot - Twin Friction-Loc - Standard","description":"\u003cp\u003eThe MMS11 VESA Monitor Mount to 5\/8″ Spigot – Twin Friction-Loc – Standard supports broadcast \u0026amp; production quality monitors up to 40 lb\/18kg. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins.\u003c\/p\u003e\n\u003cp\u003eThe Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.\u003c\/p\u003e\n\u003cp\u003eThe Standard VESA mounting plate model comes with our industry favourite captive thumbscrews and will fit FDMI Standard VESA 75\/100mm patterns.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 40 lb\/18kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.630kg\/1.189lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Quick Release and\/or Landscape\/Portrait functionality, consider our other MMS11 models.\u003c\/p\u003e\n\u003cp\u003eFor mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer our single hinge models, consider our MMS12 Single-Hinge Friction-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/20200515-IMG_5600NL-1.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider for SmallHD 4K Production Monitors\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00300-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe SmallHD 4K Standard VESA Plate Spacers + Thumbscrews to clear away the VESA plate from the SmallHD 4K monitor VESA\/fan arrangement by an additional 3\/8″ (10mm) spacing.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761081524362,"sku":"11585","price":235.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-11585.jpg?v=1787682893"},{"product_id":"11588","title":"Upgrade Innovations MMS11 VESA Monitor Mount to 5\/8\" Spigot - Twin Friction-Loc - L\/P","description":"\u003cp\u003eThe MMS11 VESA Monitor Mount to 5\/8″ Spigot – Twin Friction-Loc – L\/P supports broadcast \u0026amp; production quality monitors up to 40 lb\/18kg. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins.\u003c\/p\u003e\n\u003cp\u003eThe Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.\u003c\/p\u003e\n\u003cp\u003eThe L\/P VESA mounting plate model is studio friendly. Quickly swing your monitor from the landscape to portrait position or level the monitor when on an uneven surface. This mounting option comes with built in adjustable friction and a locking knob to hold the monitor in place. Ideal for your green screen, stills and social media work, as you can make use of the full monitor display screen. The model comes with our industry favourite captive thumbscrews and will fit FDMI Standard VESA 75\/100mm patterns.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 40 lb\/18kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.750kg\/1.653lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Standard VESA, Quick Release and\/or Landscape\/Portrait functionality, consider our other MMS11 models.\u003c\/p\u003e\n\u003cp\u003eFor mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer our single hinge models, consider our MMS12 Single-Hinge Friction-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/20200515-IMG_5600NL-1.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider for SmallHD 4K Production Monitors\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00300-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe SmallHD 4K Standard VESA Plate Spacers + Thumbscrews to clear away the VESA plate from the SmallHD 4K monitor VESA\/fan arrangement by an additional 3\/8″ (10mm) spacing.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761081622666,"sku":"11588","price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-11588.jpg?v=1787682894"},{"product_id":"11676","title":"Upgrade Innovations VESA Standard Monitor Plate","description":"\u003cp\u003eOrder the VESA Standard Monitor Plate separately for various VESA mounting applications.  The VESA Standard Monitor Plate fits all Upgrade Innovations monitor mounts.\u003c\/p\u003e\u003c!-- specs-from-master --\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCategory:\u003c\/strong\u003e Monitor Mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Upgrade Innovations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e 11676\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 0.29 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping carton:\u003c\/strong\u003e 4.72 x 4.72 x 1.57 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761081786506,"sku":"11676","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-11676.jpg?v=1787682896"},{"product_id":"11820","title":"Upgrade Innovations MMS12 VESA Monitor Mount to 5\/8\" Spigot - Friction-Loc - Standard","description":"\u003cp\u003eThe MMS12 VESA Monitor Mount to 5\/8″ Spigot – Friction-Loc – Standard supports broadcast \u0026amp; production quality monitors up to 45 lb\/20kg. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins. \u003cstrong\u003eNote: New spigot model as of April 2022 with added 1\/4-20 and 3\/8-16 tapped holes!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments.\u003c\/p\u003e\n\u003cp\u003eThe Standard VESA mounting plate model comes with our industry favourite captive thumbscrews and will fit FDMI Standard VESA 75\/100mm patterns.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 45 lb\/20kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.530kg\/1.168lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Quick Release and\/or Landscape\/Portrait functionality, consider our other MMS12 models.\u003c\/p\u003e\n\u003cp\u003eFor mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer further articulation and adjustment potential, consider our MMS11 Twin-Hinge Friction-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00221-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003e\u003c\/p\u003e\n\u003cp\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider for SmallHD 4K Production Monitors\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00300-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe SmallHD 4K Standard VESA Plate Spacers + Thumbscrews to clear away the VESA plate from the SmallHD 4K monitor VESA\/fan arrangement by an additional 3\/8″ (10mm) spacing.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761082409098,"sku":"11820","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-11820.jpg?v=1787682898"},{"product_id":"11830","title":"Upgrade Innovations MMS12 VESA Monitor Mount to 5\/8\" Spigot - Friction-Loc - L\/P","description":"\u003cp\u003eThe MMS12 VESA Monitor Mount to 5\/8″ Spigot – Friction-Loc – L\/P supports broadcast \u0026amp; production quality monitors up to 45 lb\/20kg. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins. \u003cstrong\u003eNote: New spigot model as of April 2022 with added 1\/4-20 and 3\/8-16 tapped holes!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments.\u003c\/p\u003e\n\u003cp\u003eThe L\/P VESA mounting plate model is studio friendly. Quickly swing your monitor from the landscape to portrait position or level the monitor when on an uneven surface. This mounting option comes with built in adjustable friction and a locking knob to hold the monitor in place. Ideal for your green screen, stills and social media work, as you can make use of the full monitor display screen. The model comes with our industry favourite captive thumbscrews and will fit FDMI Standard VESA 75\/100mm patterns.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 45 lb\/20kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.500kg\/1.102lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Standard VESA, Quick Release and\/or Landscape\/Portrait functionality, consider our other MMS12 models.\u003c\/p\u003e\n\u003cp\u003eFor mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer further articulation and adjustment potential, consider our MMS11 Twin-Hinge Friction-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00221-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider for SmallHD 4K Production Monitors\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00300-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe SmallHD 4K Standard VESA Plate Spacers + Thumbscrews to clear away the VESA plate from the SmallHD 4K monitor VESA\/fan arrangement by an additional 3\/8″ (10mm) spacing.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761082441866,"sku":"11830","price":252.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/norm-20200515-IMG_5678_06e38774-d361-4115-9caa-6d73a13fedb5.png?v=1784752389"},{"product_id":"11837","title":"Upgrade Innovations MMS Standard VESA Plate Thumbscrews (Set of 4)","description":"\u003cp\u003eOrder extra thumbscrews for your Standard VESA or Landscape\/Portrait VESA Plate monitor plate.\u003c\/p\u003e\n\u003cp\u003eOnly compatible with our VESA Standard Monitor Plate and VESA Landscape\/Portrait Swinger Mount Adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot compatible with our Quick Release Monitor Plate.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761082540170,"sku":"11837","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-11837.jpg?v=1787682900"},{"product_id":"11882","title":"Upgrade Innovations Arri 3\/8\" Pin-Loc 15mm Pivot Clamp","description":"\u003cp\u003eThe Arri 3\/8″ Pin-Loc 15mm Pivot Clamp allows you to add an offset 15mm rod mount to your camera setup via any Arri 3\/8″ Pin-Loc mounting pattern. Mount the clamp to any Arri style mounting point by tightening the screw with a 5\/32 or 4mm Hex Key, which can be positioned at 90-degree increments. Make use of the positive Ball-Loc system to adjust the angle of the 15mm rod by 15 degree increments.\u003c\/p\u003e\n\u003cp\u003eThe Arri 3\/8″ Pin-Loc 15mm Pivot Clamp increases your camera support mounting options, while allowing for adjustability.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761082605706,"sku":"11882","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-11882.jpg?v=1787682901"},{"product_id":"11890","title":"Upgrade Innovations VESA Landscape\/Portrait Swinger Mount Adapter","description":"\u003cp\u003eFor those that already own our Monitor Mounts, the VESA Landscape\/Portrait LP-Swinger Mount Adapter is the perfect option to upgrade your setup. Simply exchange your existing VESA monitor plate for the LP-Swinger assembly. The VESA LP-Swinger Mount Adapter fits all Upgrade Innovations monitor mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: For installs to our Whaley Rail Clamp, the L\/P VESA Plate cannot mount to Rail Clamp without the Whaley Rail Clamp Spacer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVESA Landscape Portrait Installation Instructions\u003c\/strong\u003e\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761082638474,"sku":"11890","price":122.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-11890.jpg?v=1787682903"},{"product_id":"12015","title":"Upgrade Innovations VESA Quick Release \u0026 Landscape\/Portrait Mount Adapter","description":"\u003cp\u003eFor those that already own our Monitor Mounts, the VESA Quick Release + Landscape\/Portrait Mount Adapter is the perfect option to upgrade your setup. Simply exchange your existing VESA monitor plate for the Quick Release + Landscape\/Portrait assembly. The VESA Quick Release + Landscape\/Portrait Mount Adapter fits all Upgrade Innovations monitor mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: For installs to our Whaley Rail Clamp, the QR-L\/P VESA Plate cannot mount to Rail Clamp without the Whaley Rail Clamp Spacer.\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePurchase the full assembly or either the QR-L\/P Receiver Plate or QR Monitor Plate to build out your QR setup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVESA Landscape Portrait Installation Instructions\u003c\/strong\u003e\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761082671242,"sku":"12015","price":217.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12015.jpg?v=1787682905"},{"product_id":"12045","title":"Upgrade Innovations MMS11-MC VESA Monitor Mount to 5\/8\" Spigot - Twin Ball-Loc - L\/P","description":"\u003cp\u003eThe MMS11-MC VESA Monitor Mount to 5\/8″ Spigot – Twin Ball-Loc – L\/P supports broadcast \u0026amp; production quality monitors up to 77 lb\/35kg, designed specifically for mobile cart\/truck applications. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.\u003c\/p\u003e\n\u003cp\u003eThe Ball-Loc hinge design keeps your monitor secure from the static and dynamic forces when moving your DIT cart or rolling stand on set or on location. This innovative design is for heavier loads and long term use, assured by our lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eThe L\/P VESA mounting plate model is studio friendly. Quickly swing your monitor from the landscape to portrait position or level the monitor when on an uneven surface. This mounting option comes with built in adjustable friction and a locking knob to hold the monitor in place. Ideal for your green screen, stills and social media work, as you can make use of the full monitor display screen. The model comes with our industry favourite captive thumbscrews and will fit FDMI Standard VESA 75\/100mm patterns.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 77 lb\/35kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.605kg\/1.334lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Standard VESA, Quick Release and\/or Landscape\/Portrait functionality, consider our other MMS11-MC models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer fine view-angle adjustment, consider our Friction-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer our single hinge models, consider our MMS09 Single-Hinge Ball-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/20200515-IMG_5619NL.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider for SmallHD 4K Production Monitors\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00300-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe SmallHD 4K Standard VESA Plate Spacers + Thumbscrews to clear away the VESA plate from the SmallHD 4K monitor VESA\/fan arrangement by an additional 3\/8″ (10mm) spacing.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761082769546,"sku":"12045","price":335.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12045.jpg?v=1787682907"},{"product_id":"12060","title":"Upgrade Innovations MMS11-MC VESA Monitor Mount to 5\/8\" Spigot - Twin Ball-Loc - QR-L\/P","description":"\u003cp\u003eThe MMS11-MC VESA Monitor Mount to 5\/8″ Spigot – Twin Ball-Loc – QR-L\/P supports broadcast \u0026amp; production quality monitors up to 77 lb\/35kg, designed specifically for mobile cart\/truck applications. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.\u003c\/p\u003e\n\u003cp\u003eThe Ball-Loc hinge design keeps your monitor secure from the static and dynamic forces when moving your DIT cart or rolling stand on set or on location. This innovative design is for heavier loads and long term use, assured by our lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eThe QR-L\/P VESA mounting plate model combines the capabilities of the LP-Swinger model with the convenience of the Quick Release option. Keep setup and take-down time to a minimum, while making full use of the full monitor display screen by swinging your monitor from the landscape to portrait position.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 77 lb\/35kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.725kg\/1.598lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Standard VESA, Quick Release or Landscape\/Portrait functionality, consider our other MMS11-MC models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer fine view-angle adjustment, consider our Friction-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer our single hinge models, consider our MMS09 Single-Hinge Ball-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/20200515-IMG_5619NL.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761082802314,"sku":"12060","price":435.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12060.jpg?v=1787682908"},{"product_id":"12080","title":"Upgrade Innovations Arri 3\/8\" Pin-Loc Adapter to Arri Rosette Receiver","description":"\u003cp\u003eThe Arri 3\/8″ Pin-Loc Adapter to Arri Rosette Receiver turns any Arri 3\/8 Pin-Loc to an Arri rosette receiver with M6 thread. Strong and versatile, the rosette is clocked for proper alignment and doweled to handle heavier loads allowing it to be used to mount camera top handles, EVF, monitors or grips that mount to Arri style rosettes.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761082835082,"sku":"12080","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12080.jpg?v=1787682910"},{"product_id":"12085","title":"Upgrade Innovations MMS11 VESA Monitor Mount to 5\/8\" Spigot - Twin Friction-Loc - QR","description":"\u003cp\u003eThe MMS11 VESA Monitor Mount to 5\/8″ Spigot – Twin Friction-Loc – Quick Release supports broadcast \u0026amp; production quality monitors up to 40 lb\/18kg, designed specifically for mobile cart\/truck applications. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.\u003c\/p\u003e\n\u003cp\u003eThe Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.\u003c\/p\u003e\n\u003cp\u003eThe QR VESA mounting plate model allows you to use much smaller storage\/transport cases while keeping setup and take-down time to a minimum. The slim VESA Quick Release Monitor Plate fits to the back of your VESA 75\/100mm monitor taking up little space, only adding 10mm\/0.39″.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 40 lb\/18kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.760kg\/1.675lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Standard VESA, Quick Release and\/or Landscape\/Portrait functionality, consider our other MMS11 models.\u003c\/p\u003e\n\u003cp\u003eFor mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer our single hinge models, consider our MMS12 Single-Hinge Friction-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/20200515-IMG_5600NL-1.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761082867850,"sku":"12085","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/norm-20200520-IMG_5941_44568c9e-3bd8-4014-bfaf-d041402c8b57.png?v=1784752400"},{"product_id":"12090","title":"Upgrade Innovations VESA Quick Release \u0026 Landscape\/Portrait Receiver Plate","description":"\u003cp\u003eThe VESA Quick Release \u0026amp; Landscape\/Portrait Receiver Plate can be purchased separately to outfit more Upgrade Innovations MMS spigot mounts and Whaley Rail Clamps (Rail Clamp Spacer required)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: For installs to our Whaley Rail Clamp, the QR-L\/P VESA Plate cannot mount to Rail Clamp without the Whaley Rail Clamp Spacer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVESA Landscape Portrait Installation Instructions\u003c\/strong\u003e\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761082966154,"sku":"12090","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12090.jpg?v=1787682912"},{"product_id":"12120","title":"Upgrade Innovations MMS12 VESA Monitor Mount to 5\/8\" Spigot - Friction-Loc - QR","description":"\u003cp\u003eThe MMS12 VESA Monitor Mount to 5\/8″ Spigot – Friction-Loc – QR supports broadcast \u0026amp; production quality monitors up to 45 lb\/20kg. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins. \u003cstrong\u003eNote: New spigot model as of April 2022 with added 1\/4-20 and 3\/8-16 tapped holes!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments.\u003c\/p\u003e\n\u003cp\u003eThe QR VESA mounting plate model allows you to use much smaller storage\/transport cases while keeping setup and take-down time to a minimum. The slim VESA Quick Release Monitor Plate fits to the back of your VESA 75\/100mm monitor taking up little space, only adding 10mm\/0.39″.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 45 lb\/20kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.530kg\/1.168lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Standard VESA, Quick Release and\/or Landscape\/Portrait functionality, consider our other MMS12 models.\u003c\/p\u003e\n\u003cp\u003eFor mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer further articulation and adjustment potential, consider our MMS11 Twin-Hinge Friction-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00221-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003e\u003c\/p\u003e\n\u003cp\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761082998922,"sku":"12120","price":285.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12120.jpg?v=1787682914"},{"product_id":"12130","title":"Upgrade Innovations MMS12 VESA Monitor Mount to 5\/8\" Spigot - Friction-Loc - QR-L\/P","description":"\u003cp\u003eThe MMS12 VESA Monitor Mount to 5\/8″ Spigot – Friction-Loc – QR-L\/P supports broadcast \u0026amp; production quality monitors up to 45 lb\/20kg. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins. \u003cstrong\u003eNote: New spigot model as of April 2022 with added 1\/4-20 and 3\/8-16 tapped holes!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments.\u003c\/p\u003e\n\u003cp\u003eThe QR-L\/P VESA mounting plate model combines the capabilities of the LP-Swinger model with the convenience of the Quick Release option. Keep setup and take-down time to a minimum, while making full use of the full monitor display screen by swinging your monitor from the landscape to portrait position.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 45 lb\/20kg.\u003c\/p\u003e\n\u003cp\u003eWeight: 0.625kg\/1.378lbs\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer Standard VESA, Quick Release or Landscape\/Portrait functionality, consider our other MMS12 models.\u003c\/p\u003e\n\u003cp\u003eFor mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer further articulation and adjustment potential, consider our MMS11 Twin-Hinge Friction-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00221-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761083129994,"sku":"12130","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/norm-20200515-IMG_5682_7054fbff-a8d7-4899-856a-b8458da014e4.png?v=1784752405"},{"product_id":"12134","title":"Upgrade Innovations Spigot Adapter for VESA Plate \u0026 Laptop Tray","description":"\u003cp\u003eThe Spigot Adapter for VESA Plate \u0026amp; Laptop Tray can be mounted to our Laptop Tray, VESA Quick Release Mount Adapter, Ruckus Mounting Plate and our Battery Mounting Plate.\u003c\/p\u003e\n\u003cp\u003eThe Laptop Tray is mounted with 2x M5 screws, while others are mounted with 2x 1\/4-20 screws.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761083228298,"sku":"12134","price":52.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12134.jpg?v=1787682916"},{"product_id":"12167","title":"Upgrade Innovations MMS11 5\/8\" Spigot - Twin Friction-Loc","description":"\u003cp\u003eThe MMS11 5\/8″ Spigot – Twin Friction-Loc supports broadcast \u0026amp; production quality monitors up to 40 lb\/18kg. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins.\u003c\/p\u003e\n\u003cp\u003eThe Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.\u003c\/p\u003e\n\u003cp\u003eThe MMS11 5\/8″ Spigot – Twin Friction-Loc model comes with no VESA plate. Order this version and add a VESA Plate separately. This model is ideal for users that are looking for a new spigot mount to transfer an existing Upgrade Innovations VESA plate to, or if users are looking to outfit a mount with a QR Receiver Plate or a QR-L\/P Receiver Plate.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 40 lb\/18kg.\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that need to purchase with a VESA plate, consider our other MMS11 models.\u003c\/p\u003e\n\u003cp\u003eFor mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer our single hinge models, consider our MMS12 Single-Hinge Friction-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/20200515-IMG_5600NL-1.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider for SmallHD 4K Production Monitors\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00300-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe SmallHD 4K Standard VESA Plate Spacers + Thumbscrews to clear away the VESA plate from the SmallHD 4K monitor VESA\/fan arrangement by an additional 3\/8″ (10mm) spacing.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761083293834,"sku":"12167","price":185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12167.jpg?v=1787682917"},{"product_id":"12168","title":"Upgrade Innovations MMS11-MC 5\/8\" Spigot - Twin Ball-Loc","description":"\u003cp\u003eThe MMS11-MC 5\/8″ Spigot – Twin Ball-Loc supports broadcast \u0026amp; production quality monitors up to 77 lb\/35kg, designed specifically for mobile cart\/truck applications. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins. The two-point adjustment design, allows for unlimited viewing positions, making it a preferred mounting option.\u003c\/p\u003e\n\u003cp\u003eThe Ball-Loc hinge design keeps your monitor secure from the static and dynamic forces when moving your DIT cart or rolling stand on set or on location. This innovative design is for heavier loads and long term use, assured by our lifetime warranty.\u003c\/p\u003e\n\u003cp\u003eThe MMS11-MC 5\/8″ Spigot – Twin Ball-Loc model comes with no VESA plate. Order this version and add a VESA Plate separately. This model is ideal for users that are looking for a new spigot mount to transfer an existing Upgrade Innovations VESA plate to, or if users are looking to outfit a mount with a QR Receiver Plate or a QR-L\/P Receiver Plate.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 77 lb\/35kg.\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that need to purchase with a VESA plate, consider our other MMS11-MC models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer fine view-angle adjustment, consider our Friction-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer our single hinge models, consider our MMS09 Single-Hinge Ball-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/20200515-IMG_5619NL.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider for SmallHD 4K Production Monitors\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00300-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe SmallHD 4K Standard VESA Plate Spacers + Thumbscrews to clear away the VESA plate from the SmallHD 4K monitor VESA\/fan arrangement by an additional 3\/8″ (10mm) spacing.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761083359370,"sku":"12168","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12168.jpg?v=1787682919"},{"product_id":"12169","title":"Upgrade Innovations MMS12 5\/8\" Spigot - Friction-Loc","description":"\u003cp\u003eThe MMS12 5\/8″ Spigot – Friction-Loc supports broadcast \u0026amp; production quality monitors up to 45 lb\/20kg. Chosen by professionals \u0026amp; rental houses to mount VESA standard monitors to 5\/8” (16mm) baby pins. \u003cstrong\u003eNote: New spigot model as of April 2022 with added 1\/4-20 and 3\/8-16 tapped holes!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Friction-Loc hinge design features our industry strong friction disks, providing a strong hold and convenience to set your monitor in almost any viewing position. The system is best for fine adjustments.\u003c\/p\u003e\n\u003cp\u003eThe MMS12 5\/8″ Spigot – Friction-Loc model comes with no VESA plate. Order this version and add a VESA Plate separately. This model is ideal for users that are looking for a new spigot mount to transfer an existing Upgrade Innovations VESA plate to, or if users are looking to outfit a mount with a QR Receiver Plate or a QR-L\/P Receiver Plate.\u003c\/p\u003e\n\u003cp\u003eMount wireless receivers, transmitters, antennas or other accessories directly to our Monitor Mounts using the 1\/4-20, 3\/8-16 or M5 non-twist threaded holes. See drop down menu below for further information regarding our non-twist mounting accessories.\u003c\/p\u003e\n\u003cp\u003eSupports up to 45 lb\/20kg.\u003c\/p\u003e\n\u003cp\u003eMade in Canada. NAFTA Qualified. CETA Qualified.\u003c\/p\u003e\n\u003cp\u003eFor those that need to purchase with a VESA plate, consider our other MMS12 models.\u003c\/p\u003e\n\u003cp\u003eFor mobile cart applications where superior hold for higher load rating is needed, consider our Ball-Loc models.\u003c\/p\u003e\n\u003cp\u003eFor those that prefer further articulation and adjustment potential, consider our MMS11 Twin-Hinge Friction-Loc models.\u003c\/p\u003e\n\u003ch3\u003eConsider mounting accessories via M5 non-twist baby pin or 15mm spud\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00221-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003e\u003c\/p\u003e\n\u003cp\u003eMMS 5\/8 Baby Pin Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 5\/8 Non-Twist Baby Pin can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 5\/8 Baby Pin also provides a 3\/8 tapped thread for mounting accessories.\u003c\/p\u003e\n\u003cp\u003eMMS 15mm Mounting Spud Non-Twist – M5\u003c\/p\u003e\n\u003cp\u003eThe MMS 15mm Non-Twist Mounting Spud can be mounted via the M5 thread found on all of our latest Monitor Mounts. Mounts via 5\/32 or 4mm Hex Key. Once mounted, the top of the 15mm Mounting Spud also provides a 3\/8 tapped thread for mounting accessories. Spuds come with captive and friction o-rings to keep accessories in place while adjusting or loosening.\u003c\/p\u003e\n\u003cp\u003eSelect either mounting standard to mount accessories with 15mm or 5\/8 baby pin standard components. Pair either accessory with our Rudy Arm articulating arm for endless mounting options.\u003c\/p\u003e\n\u003ch3\u003eConsider for SmallHD 4K Production Monitors\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/DSC00300-Edit.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe SmallHD 4K Standard VESA Plate Spacers + Thumbscrews to clear away the VESA plate from the SmallHD 4K monitor VESA\/fan arrangement by an additional 3\/8″ (10mm) spacing.\u003c\/p\u003e\n\u003ch3\u003eConsider our Baby Pin Pan Lock Clamp\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/upgradeinnovations.com\/wp-content\/uploads\/14400-Baby-Pin-Pan-Lock-Clamp_01.png\" style=\"display:block;margin:24px auto 0;width:500px;max-width:100%;\"\u003eThe Baby Pin Pan Lock Clamp limits the mount from panning on the baby pin and will keep monitors in the desired orientation.\u003c\/p\u003e","brand":"Upgrade Innovations","offers":[{"title":"Default Title","offer_id":49761083392138,"sku":"12169","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/5240\/3338\/files\/canvas-12169.jpg?v=1787682921"}],"url":"https:\/\/cinebits.co\/collections\/rigging.oembed?page=28","provider":"CineBits","version":"1.0","type":"link"}